![subject](/tpl/images/cats/User.png)
Engineering, 07.08.2019 17:10 hemaam8
A10.0 mm diameter cylindrical specimen of a bearing bronze material is pulled under uniaxial tension with a force of 1500 n. the diameter of the bar reduces by 0.67 ? m. compute the modulus o for this material given that it's poisson's ratio, v, is 0.35.
![ansver](/tpl/images/cats/User.png)
Answers: 1
Another question on Engineering
![question](/tpl/images/cats/User.png)
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
A10.0 mm diameter cylindrical specimen of a bearing bronze material is pulled under uniaxial tension...
Questions
![question](/tpl/images/cats/biologiya.png)
Biology, 14.01.2020 21:31
![question](/tpl/images/cats/mat.png)
Mathematics, 14.01.2020 21:31
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/fizika.png)
![question](/tpl/images/cats/istoriya.png)
History, 14.01.2020 21:31
![question](/tpl/images/cats/geografiya.png)
Geography, 14.01.2020 21:31
![question](/tpl/images/cats/en.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/es.png)
![question](/tpl/images/cats/istoriya.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 14.01.2020 21:31
![question](/tpl/images/cats/en.png)
![question](/tpl/images/cats/fizika.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 14.01.2020 21:31
![question](/tpl/images/cats/en.png)
![question](/tpl/images/cats/ekonomika.png)
Business, 14.01.2020 21:31
![question](/tpl/images/cats/en.png)
![question](/tpl/images/cats/pravo.png)