Engineering, 07.08.2019 17:20 drainy0uandthefish

Saline solution is a mixture of sodium chloride and water and has a number of uses in medicine. when administered via an iv drip it can be an effective treatment for dehydration. a cylindrical bag, as shown below, of radius 10 cm and height 50 cm contains saline solution that is provided to a patient as an iv gravity drip. a gravity drip is used to infuse the solution into the patient's blood stream. the solution flows downwards into a hole of 1 mm at the bottom of the bag. the only resistance presented is the viscous resistance through the tubing. determine the time it will take for the bag to empty by 90%.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

You know the right answer?

Saline solution is a mixture of sodium chloride and water and has a number of uses in medicine. when...

Questions