Engineering, 07.08.2019 18:10 emmie50
Diametrical pitch is the number of teeth on a gear per millimeter. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Diametrical pitch is the number of teeth on a gear per millimeter. a)- true b)- false...
Social Studies, 19.12.2019 22:31
Mathematics, 19.12.2019 22:31
Mathematics, 19.12.2019 22:31
Computers and Technology, 19.12.2019 22:31
Physics, 19.12.2019 22:31
Mathematics, 19.12.2019 22:31
Mathematics, 19.12.2019 22:31
Social Studies, 19.12.2019 22:31