subject
Engineering, 07.08.2019 18:30 slaybyely

Two large plane surfaces are 2.8 cm apart. the space between the surfaces is filled with glycerine. what force is required to drag a very thin plate of surface area of 0.6 m^2 between the two large plane surfaces at a speed of 1.5 m/s, if (i) the thin plate is in the middle of the two plane surfaces, and (ii) the thin plate is at a distance of 0.7 cm from one of the plane surfaces? assume the kinematic viscosity of glycerine is 3 1.19x10^3 m2 /s.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Two large plane surfaces are 2.8 cm apart. the space between the surfaces is filled with glycerine....
Questions
question
Mathematics, 14.11.2020 04:20
question
Mathematics, 14.11.2020 04:20
Questions on the website: 13722363