subject
Engineering, 07.08.2019 19:20 TerronRice

A50-mm-diameter, thin-walled metal pipe covered with a 25-mm-thick layer of insulation (0.085 w/m k) and carrying superheated steam at atmospheric pressure is suspended from the ceiling of a large room. the steam temperature entering the pipe is 120°c, and the air temperature in the room is 20°c. the convection heat transfer coefficient on the outer surface of the covered pipe is 10 w/m2 k. the velocity of the steam in the pipe is 10 m/s. the steam temperature at the outlet of the pipe is at tmo =106°c 1. calculate the mass flow rate of steam in the pipe. 2 calculate the total ua for the entire pipe 3 calculate the internal heat transfer coefficient hi 4 construct a resistance model and calculate the resistances “r” that affect the heat transfer from the steam to the outside air. 5 calculate the length of the pipe. 6 calculate the temperature of the pipe's surface at the exit of the pipe (tso) using the resistance model at the outlet of the pipe. 7 what would happen if tmo was cooler than 106°c?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
You know the right answer?
A50-mm-diameter, thin-walled metal pipe covered with a 25-mm-thick layer of insulation (0.085 w/m k)...
Questions
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Social Studies, 16.09.2020 01:01
question
English, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
question
Mathematics, 16.09.2020 01:01
Questions on the website: 13722363