Engineering, 14.08.2019 08:20 aylengarcia090
A100-mm-diameter cast iron shaft is acted upon by a 10 kn. m bending moment, a 8 kn. m torque, and a 150 kn axial force simultaneously. the ultimate tensile strength of the shaft material is 210 mpa, and the ultimate compressive strength of the shaft material is 750 mpa, determine the safety factor against failure for the above types of loading using a proper theory of failure.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
A100-mm-diameter cast iron shaft is acted upon by a 10 kn. m bending moment, a 8 kn. m torque, and a...
Questions
Mathematics, 17.02.2022 01:20
Mathematics, 17.02.2022 01:20
Mathematics, 17.02.2022 01:20
Biology, 17.02.2022 01:20
History, 17.02.2022 01:20
English, 17.02.2022 01:20
History, 17.02.2022 01:20
English, 17.02.2022 01:30
SAT, 17.02.2022 01:30
Physics, 17.02.2022 01:30
English, 17.02.2022 01:30
