subject
Engineering, 17.08.2019 19:10 dyanaycooper13

54. a 4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.72w/m°c) separated by 3-cm-thick plaster layers (k=0.22w/m°c). there are also 2-cm-thick plaster layers on each side of the wall, and a 2-cm-thick rigid foam (k=0.026w/m°c) on the inner side of the wall. the indoor and the outdoor temperatures are 22°c and -4°c, and the convection heat transfer coefficients on the inner and the outer sides are h1=10w/m^2°c and h2=20w/m^2°c, respectively. assuming onedimensional heat transfer and disregarding radiation, determine the rate of heat transfer through the wall.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
question
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
54. a 4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (...
Questions
question
English, 23.01.2020 13:31
question
Mathematics, 23.01.2020 13:31
Questions on the website: 13722359