Engineering, 17.08.2019 19:10 smartie80

In a dairy operation, milk at a flow rate of 250 l/h and a cow-body temperature of 38.6c must be chilled to a safe-to-store temperature of 13c or less. ground water at 10c is available at a flow rate of 0.72 m3/h. the density and specific heat of milk are 1030 kg/m3 and 3860 j/kg k, respectively. (a) determine the ua product of a counterflow heat exchanger required for the chilling process. determine the length of the exchanger if the inner pipe has a 50-mm diameter and the overall heat transfer coefficient is u 1000 w/m2 k. (b) determine the outlet temperature of the water. (c) using the value of ua found in part (a), determine the milk outlet temperature if the water flow rate is doubled. what is the outlet temperature if the flow rate is halved?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal

Answers: 3

Answer

Engineering, 04.07.2019 19:20

To design a steam turbine to produce 12,000 hp power. a engineer comsiders using a steady state stean low st 1160fr and engineer considers using a steady state steam flow at 1160°r and 450 psia to drive this steam turbine. the exhaust of the steam is cooled by the lake (vacuum). heat losing to the surroundings is measured at a rate of 555.55 btu/s. (a) sketch the system with the given conditions. (b) neglecting kinetic and potential energy changes from inlet to exit, determine the volumetric flow rate of the steam at the inlet, (ft'/hr). must clearly show unit conversions at crtical terms.

Answers: 1

Answer

Engineering, 06.07.2019 03:20

Explain in your own word the concept of a solid solution, in alloys, and how it can be created.

Answers: 3

Answer

You know the right answer?

In a dairy operation, milk at a flow rate of 250 l/h and a cow-body temperature of 38.6c must be chi...

Questions