Engineering, 18.08.2019 14:10 LillianMRucker

Large reservoir supplies water for a community. a portion of the water supply system is shown. water is pumped from the reservoir to a large storage tank before being sent on to the water treatment facility. the system is designed to provide 1310 l/s of water at 20oc. from b to c the system consists of a square-edge entrance, 760 m of pipe, three gate valves, four 45oelbows, and two 90oelbows. the gauge pressure at c is 197 kpa. the system between f and g contains 760 m of pipe, two gate valves, and four 90oelbows. all pipe is 508 mm diameter, cast iron. calculate gauge pressure at section f.

Large reservoir supplies water for a community. a portion of the water supply system is shown. water

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

You know the right answer?

Large reservoir supplies water for a community. a portion of the water supply system is shown. water...

Questions