subject
Engineering, 19.08.2019 17:30 sheldonwaid4278

Large reservoir supplies water for a community. a portion of the water supply system is shown. water is pumped from the reservoir to a large storage tank before being sent on to the water treatment facility. the system is designed to provide 1310 l/s of water at 20oc. from b to c the system consists of a square-edge entrance, 760 m of pipe, three gate valves, four 45oelbows, and two 90oelbows. the gauge pressure at c is 197 kpa. the system between f and g contains 760 m of pipe, two gate valves, and four 90oelbows. all pipe is 508 mm diameter, cast iron. calculate gauge pressure at section f.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 06.07.2019 05:10
The constant-pressure specific heat of air at 25°c is 1.005 kj/kg.°c. express this value in kj/kg k, jg c, kcalk.c, and btu/lbm °f.
Answers: 1
question
Engineering, 06.07.2019 05:20
A200-mm wide strip 25 mm thick is fed through a rolling mill w/two powered rolls each of radius = 250 mm. the work thickness is to be reduced to 22 mm in one pass at a roll speed of 60 rev/min. the average flow stress of the work material, as it passes through the rolls is 175 mpa. the friction coefficient between rolls and work material is 0.20. 1, determine a)-if friction is sufficient for rolling.b)- if friction is sufficient: c)- calculate roll force i calculate roll torque. d)- calculate roll power.
Answers: 2
question
Engineering, 06.07.2019 06:10
In general, cast irons have a carbon content greater than 2% by weight. ( true , false )
Answers: 3
You know the right answer?
Large reservoir supplies water for a community. a portion of the water supply system is shown. water...
Questions
Questions on the website: 13722359