subject
Engineering, 20.08.2019 21:30 awesomegrill

Consider a cold aluminum canned drink that is initially at a uniform temperature of 4°c. the can is 12.5 cm high and has a diameter of 6 cm. if the combined convection/radiation heat transfer coefficient between the can and the surrounding air at 25°c is 10w/m^2°c, determine how long it will take for the average temperature of the drink to rise to 15°c. in an effort to slow down the warming of the cold drink, a person puts the can in a perfectly fitting 1-cm-thick cylindrical rubber insulation (k=0.13w/m°c). now how long will it take for the average temperature of the drink to rise to 15°c

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
Consider a cold aluminum canned drink that is initially at a uniform temperature of 4°c. the can is...
Questions
question
Mathematics, 01.11.2020 01:00
question
Health, 01.11.2020 01:00
question
Mathematics, 01.11.2020 01:00
question
English, 01.11.2020 01:00
question
History, 01.11.2020 01:00
Questions on the website: 13722359