Engineering, 21.08.2019 05:10 tonimgreen17p6vqjq

Heavy fuel oil flows in a horizontal pipe with diameter of 95 cm. the oil flow rate is 0.4 m^3/s. the properties of heavy fuel oil are: density= 991 kg/m3 , and kinematic viscosity= 3.6x10^−4 m^2/s. (a) calculate the entrance length of this pipe. (b) obtain the pressure drop per unit length of the pipe and the centerline velocity. (c) obtain the shear stress at the wall and at a distance 20 cm from the centerline. (d) find the equation for the velocity distribution as a function of r only. (e) what angle is needed for a downhill flow in the pipe to make the pressure drop zero? is this possible? explain.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

Heavy fuel oil flows in a horizontal pipe with diameter of 95 cm. the oil flow rate is 0.4 m^3/s. th...

Questions