Engineering, 22.08.2019 16:10 Priskittles

The tank is filled with water (p = 997 kg/m), the tank height is 4 m and its surface area is 2 m². the opening at the bottom has a diameter of 1.5x102 m and a surface area of 1.77x10+ m². if the velocity of water escaping at the opening is represented by v = 2.g. h, where g is the gravity acceleration (9.81 m²/s) and h is the height of water inside the tank (m). a. what will be the height of water in the tank after 60 min.? b. how much time it is required to fully empty the tank? c. if a feed stream is introduced into the tank at rate of 7.84x10% (m/s), what will be the final height of water inside the tank?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers

Answers: 3

Answer

You know the right answer?

The tank is filled with water (p = 997 kg/m), the tank height is 4 m and its surface area is 2 m². t...

Questions