subject
Engineering, 22.08.2019 18:10 djemdn

Air enters the compressor of an air-standard brayton cycle with a volumetric flow rate of 60 m/s at 0.8 bar, 280 k. the compressor pressure ratio is 20, and the maximum cycle temperature is 2100k. for the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. determine (a) the net power developed, in mw. (b) the rate of heat addition in the combustor, in mw. (c) the thermal efficiency of the cycle.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
Air enters the compressor of an air-standard brayton cycle with a volumetric flow rate of 60 m/s at...
Questions
question
Social Studies, 13.12.2019 04:31
question
Mathematics, 13.12.2019 04:31
question
Mathematics, 13.12.2019 04:31
question
History, 13.12.2019 04:31
Questions on the website: 13722367