Engineering, 22.08.2019 18:10 kenny909
Nitrogen gas at atmospheric pressure and a bulk inlet temperature of 27 degree c is heated in a 2.5 cm inner diameter tube having a constant surface temperature of 100 degree c. the bulk average velocity is 1.2m/s and the tube is 1.5m long. determine the net heat transfer rate to the nitrogen, qconvection
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Nitrogen gas at atmospheric pressure and a bulk inlet temperature of 27 degree c is heated in a 2.5...
Physics, 26.03.2021 01:00
History, 26.03.2021 01:00
Social Studies, 26.03.2021 01:00
Biology, 26.03.2021 01:00
Mathematics, 26.03.2021 01:00
Mathematics, 26.03.2021 01:00
Mathematics, 26.03.2021 01:00
English, 26.03.2021 01:00