Engineering, 23.08.2019 01:30 scottcounts757
The strain-hardening behavior of an annealed, low-carbon steel is = if a bar of this metal is initially cold worked some unknown amount. it is then subjected to 20% additional cold work and its yield strength is measured as 80,000 mpa. what was the unknown amount of cold work induced prior to the 20% added cold work?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
The strain-hardening behavior of an annealed, low-carbon steel is = if a bar of this metal is initia...
Questions
Mathematics, 23.10.2019 17:00
Chemistry, 23.10.2019 17:00
Mathematics, 23.10.2019 17:00
Biology, 23.10.2019 17:00
Chemistry, 23.10.2019 17:00
Social Studies, 23.10.2019 17:00
History, 23.10.2019 17:00
Spanish, 23.10.2019 17:00
Physics, 23.10.2019 17:00
Health, 23.10.2019 17:00
