Engineering, 24.08.2019 04:30 henrylauren2006

Alight mild steel shaft of diameter 20mm is supported on self-aligning bearings to give an effective shaft length of 1.2m. the shaft supports a rotor of mass 27kg. initially it is suggested that the shaft is operated at 385 r. p.m. (i) determine the suitability of the suggested operating speed, assuming that young's modulus of elasticity is 200 gn/m2 (ii)-if the rotor's centre of gravity is positioned off the shaft axis by 0.39mm, determine the deflection of the shaft at speeds greater than 10% above the whirling speed. (iii)- explain, with a suitable graph how the shaft deflection due to whirling will behave at speeds above the whirling speed.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

You know the right answer?

Alight mild steel shaft of diameter 20mm is supported on self-aligning bearings to give an effective...

Questions