Engineering, 29.08.2019 18:30 bigmouth804
Asolid round bar with diameter of 50-mm has a groove cut to a diameter of 45-mm, with a radius of 2.5-mm. the bar is not rotating. the bar is loaded with a repeated bending load that causes the bending moment at the groove to fluctuate between 0 and 2825 n-m. the bar is hot-rolled aisi 1095, but the groove has been machined. a) determine the factor of safety for fatigue based on infinite life and b) determinethe factor of safety for yielding.
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Asolid round bar with diameter of 50-mm has a groove cut to a diameter of 45-mm, with a radius of 2....
Computers and Technology, 05.05.2020 05:16
Physics, 05.05.2020 05:16
Mathematics, 05.05.2020 05:16
English, 05.05.2020 05:16
History, 05.05.2020 05:16
Mathematics, 05.05.2020 05:16
Chemistry, 05.05.2020 05:16
Mathematics, 05.05.2020 05:16
Computers and Technology, 05.05.2020 05:16
Physics, 05.05.2020 05:16
Computers and Technology, 05.05.2020 05:16