Engineering, 30.08.2019 21:00 kadeWayne
Steam flows steadily into a turbine with a mass flow rate of 26 kg/s and a negligible velocity at 6 mpa and 600°c. the steam leaves the turbine at 0.5 mpa and 200°c with a velocity of 180 m/s. the rate of work done by the steam in the turbine is measured to be 20 mw. if the elevation change between the turbine inlet and exit is negligible, determine: (a) the rate of heat transfer associated with this process.
Answers: 2
![mh_{in}=m[h_{out}+\frac{V_{out}^2}{2}]+W_{out}+Q_{out}](/tpl/images/0212/9685/23290.png)
![Q_{out}=m[h_{in}-h_{out}-\frac{V_{out}^2}{2}]-W_{out} \\Q_{out}=26\frac{kg}{s}(3658.8\frac{kJ}{kg}-2855.8\frac{kJ}{kg}-\frac{(180\frac{m}{s})^2}{2} ) -20MW*\frac{1000kW}{1MW} \\Q_{out}=26\frac{kg}{s}(803\frac{kJ}{kg}-16200\frac{J}{kg}*\frac{1kJ}{1000J} ) -20000kW\\Q_{out}=456.8kW](/tpl/images/0212/9685/841b1.png)
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
Steam flows steadily into a turbine with a mass flow rate of 26 kg/s and a negligible velocity at 6...
Questions
Mathematics, 09.05.2020 09:57
Biology, 09.05.2020 09:57
Mathematics, 09.05.2020 09:57
Mathematics, 09.05.2020 09:57
History, 09.05.2020 09:57
Chemistry, 09.05.2020 09:57
Mathematics, 09.05.2020 09:57
History, 09.05.2020 09:57
Mathematics, 09.05.2020 09:57
History, 09.05.2020 09:57
Mathematics, 09.05.2020 09:57
History, 09.05.2020 09:57
Biology, 09.05.2020 09:57
