Engineering, 30.08.2019 22:10 arianaaldaz062002
Engine oil at 100c flows over a flat plate with a velocity of 1.3m/s. determine (a) the local drag coefficient at a distance of 2.5m from the leading edge, and (b) the average drag coefficient and the drag force acting per 1m width of the plate over the distance of 2.5m from the leading edge
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engine oil at 100c flows over a flat plate with a velocity of 1.3m/s. determine (a) the local drag c...
English, 27.03.2021 03:00
Arts, 27.03.2021 03:00
Advanced Placement (AP), 27.03.2021 03:00
Mathematics, 27.03.2021 03:00
Mathematics, 27.03.2021 03:00
Mathematics, 27.03.2021 03:00
Social Studies, 27.03.2021 03:00
Mathematics, 27.03.2021 03:00
History, 27.03.2021 03:00
Mathematics, 27.03.2021 03:00