The heat input to an otto cycle is 1000kj/kg. the compression ratio is 8 and the pressure and temperature at the beginning of the compression stroke are 100kpa and 15â°c. determine a. the maximum temperature and pressure in the cycle b. the thermal efficiency of the cycle c. the net work output d. the mean effective pressure

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.