Engineering, 02.09.2019 20:10 tanya44737
Ametal pipe with an outside diameter (od) of 12cm is covered with an insulation material [k-0.07w/m.°c] of 2.5cm thick. if the outer pipe wall is at 100°c and the outer surface of the insulation is at 20°c, find the heat loss from the pipe per meter length
Answers: 1
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Ametal pipe with an outside diameter (od) of 12cm is covered with an insulation material [k-0.07w/m....
Mathematics, 18.02.2020 21:47
Biology, 18.02.2020 21:47
Health, 18.02.2020 21:48
Computers and Technology, 18.02.2020 21:48
Mathematics, 18.02.2020 21:48