subject
Engineering, 03.09.2019 00:30 abdalla46

The company flew an aircraft to mobile alabama for maintenance, repair, and overhaul (mro) service. the aircraft basic weight was 2886 and had a moment calculated at 101673.78. while in the hanger the aircraft was required to be modified. two 15 pound seats located at station +71 were required to be removed. a new cabinet weighing 97 pounds was installed in place of the seats (at station +71). also at station +71, an upgraded seat weighing 20 pounds was installed. as part of the new modification, new radio equipment was installed at station +94 weighing 30 pounds. calculate the new weight of the aircraft and cg of the aircraft after modification:

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
The company flew an aircraft to mobile alabama for maintenance, repair, and overhaul (mro) service....
Questions
question
Biology, 28.06.2019 16:00
question
Mathematics, 28.06.2019 16:00
Questions on the website: 13722363