subject
Engineering, 11.09.2019 01:30 tommyaberman

2.19 for a k+−cl− ion pair, attractive and repulsive energies ea and er, respectively, depend on the distance between the ions r, according to e a = − 1.436 r e r = 5.86 × 10 − 6 r 9 ea=−1.436rer=5.86×10−6r9 for these expressions, energies are expressed in electron volts per k+−cl− pair, and r is the distance in nanometers. the net energy en is just the sum of the preceding two expressions. (a) superimpose on a single plot en, er, and ea versus r up to 1.0 nm. (b) on the basis of this plot, determine (i) the equilibrium spacing r0 between the k+ and cl− ions, and (ii) the magnitude of the bonding energy e0 between the two ions.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 06.07.2019 04:30
Briefly discuss how plastic deformation occurs in crystalline materials discuss the five most important methods of strengthening of metals and alloys.
Answers: 2
You know the right answer?
2.19 for a k+−cl− ion pair, attractive and repulsive energies ea and er, respectively, depend on the...
Questions
question
Mathematics, 03.04.2020 02:22
question
Mathematics, 03.04.2020 02:22
question
Mathematics, 03.04.2020 02:22
question
Mathematics, 03.04.2020 02:22
question
Mathematics, 03.04.2020 02:22
Questions on the website: 13722367