Engineering, 13.09.2019 01:30 taetae83
Water flows through a tee in a horizontal pipe system. the velocity in the stem of the tee is 15 ft/s, and the diameter is 12 in. each branch is of 6 ݅݊in diameter. if the pressure in the stem is 20 psi, calculate magnitude and direction of the force of the water on the tee if the flow rate in the branches are the same.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
Water flows through a tee in a horizontal pipe system. the velocity in the stem of the tee is 15 ft/...
Mathematics, 02.09.2019 04:50
Social Studies, 02.09.2019 04:50
Physics, 02.09.2019 04:50
Geography, 02.09.2019 04:50
History, 02.09.2019 04:50
Mathematics, 02.09.2019 04:50
Chemistry, 02.09.2019 04:50
Mathematics, 02.09.2019 04:50
Chemistry, 02.09.2019 04:50