Engineering, 13.09.2019 16:20 lindseycagle00
Ues the conjugate-beam method and determine the slop and deflection at c. assume a is a pin and b is a roller, ei is constant.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Ues the conjugate-beam method and determine the slop and deflection at c. assume a is a pin and b is...
Biology, 17.10.2019 07:50
Physics, 17.10.2019 07:50
English, 17.10.2019 07:50
Mathematics, 17.10.2019 07:50
Business, 17.10.2019 07:50
History, 17.10.2019 07:50
History, 17.10.2019 07:50
Social Studies, 17.10.2019 07:50
Mathematics, 17.10.2019 07:50