Q1
convert the bearings to azimuths from north and compute
theangle . smaller then 180 d...
Engineering, 13.09.2019 16:30 zelles9300
Q1
convert the bearings to azimuths from north and compute
theangle . smaller then 180 degree. between successive
bearings.
n66 degree 17' 36"e, s44 dgree 22'34"e, s8 degree 23' 42"w, and
n57 degree 08' 55"w.
q2
compute theazimuth from north of lin cd . ( azimuths of ab
arealso from north.)
bearing ab= s59 degree 48' 23"w; angle to the right
abc = 205 degree 56' 11" , bcd= 195 degree 23' 08".
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 19:20
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
History, 08.07.2019 05:40
History, 08.07.2019 05:40
Biology, 08.07.2019 05:40
Social Studies, 08.07.2019 05:40
Biology, 08.07.2019 05:40
Mathematics, 08.07.2019 05:40
History, 08.07.2019 05:40
Mathematics, 08.07.2019 05:40
Social Studies, 08.07.2019 05:40
Chemistry, 08.07.2019 05:40
History, 08.07.2019 05:40
History, 08.07.2019 05:40
History, 08.07.2019 05:40