Stormwater controls are typically designed by civil
engineers. stormwater is collected in pipes below the ground and
routed to nearby surface water. but the surface water becomes
polluted with all the particulates, oils, animal wastes, and other
debris that is washed off surfaces as the water flows into
collection pipes. suggest an alternative engineering design
solution that would increase the sustainability of stormwater
control.

Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.