subject
Engineering, 13.09.2019 18:30 nataliemoore1974

A200 m3 swimming pool has been overly chlorinated by accidently
dumping an entire
container of chlorine, which amounted to 500 grams. this creates a
chlorine
concentration well in excess of the 0.20 mg/l that was the
objective at the time. with
which volumetric rate (in l/min) of freshwater should the pool be
flushed to decrease the
concentration to the desired level in 36 hours? you may assume the
chlorine does not
degrade chemically during those hours.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
A200 m3 swimming pool has been overly chlorinated by accidently
dumping an entire
contai...
Questions
question
Mathematics, 20.06.2020 21:57
Questions on the website: 13722367