subject
Engineering, 13.09.2019 21:10 minersaysay22

Upper left horizontal force 20kn --> on girder
ijkl
underneath is another horizontal force 40kn --> on girder
efgh
bottom is a, b, c, d all fixed. heights between ground and
girder efgh is 4m, b/t efgh and ijkl also 4m. length b/t a and b is
4m, b/t b and c is 5m, and b/t c and d is 4m.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
You know the right answer?
Upper left horizontal force 20kn --> on girder
ijkl
underneath is another horizontal...
Questions
question
Mathematics, 12.02.2021 18:30
Questions on the website: 13722367