Engineering, 13.09.2019 21:30 Sjanaya853

Asinglephase transformer has the following
nameplate data:
rating 150kva
primaryvoltage 7.2kv
secondaryvoltage 600v
frequency 60hz
whenoperating at rated load (full load) the
following lossesoccur:
hysterisisloss 550 w
eddy currentloss 400 w
total copperlosses 1800 w (primary + secondary)
thetransformer is to be used on a 50 hz system with
the restrictionthat it is to
maintain thesame maximum core flux density and the
same total losses. thiswill
result in thesame full load operating temperature.
determine:
(i) the newprimary and secondary voltage rating at
50 hz;
(ii) the newkva rating of the transformer of the 50
hz.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

Answer

You know the right answer?

Asinglephase transformer has the following
nameplate data:
rating 150kva
primaryv...

Questions