subject
Engineering, 13.09.2019 22:20 Isaacochoa780

Atension specimen has the initial length, width and thickness of 100 mm, 10 mm, and 2 mm, respectively. the test specimen was pulled until fracture. the maximum load registered on the tension machine was 360n and the load at fracture was 320n. knowing that the specimen length at fracture was 130 mm, determine (a) the ultimate tensile strength (uts) of the test material (b) the percent strain at fracture (ductility) and (c) what metal this may be

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
You know the right answer?
Atension specimen has the initial length, width and thickness of 100 mm, 10 mm, and 2 mm, respective...
Questions
question
Social Studies, 28.01.2020 19:12
question
Social Studies, 28.01.2020 19:12
Questions on the website: 13722360