Engineering, 13.09.2019 22:30 joaquin42
In a tube flow problem with contant wall heat flux or wall temperature, the nusselt number is constant in the fully-developed region for both the temperature and velocity fileds, which means the effect of convective heat transfer is not significant. why is that? what problem will be created when the viscous term is neglected in the momenturm equation?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
In a tube flow problem with contant wall heat flux or wall temperature, the nusselt number is consta...
Questions
History, 20.09.2020 09:01
Mathematics, 20.09.2020 09:01
Chemistry, 20.09.2020 09:01
Physics, 20.09.2020 09:01
Mathematics, 20.09.2020 09:01
World Languages, 20.09.2020 09:01
English, 20.09.2020 09:01
Biology, 20.09.2020 09:01
Mathematics, 20.09.2020 09:01
Mathematics, 20.09.2020 09:01
