Engineering, 13.09.2019 22:30 allisonlillian
Ashaft rotating at 2,500 rpm is transmitting a power of 15 hp. (a) if the diameter of the shaft is 1.5 in, determine the maximum shear stress. (b) if the circular shaft is to be replaced with a square shaft, what would be the size to that the maximum shear stress remains the same?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
Ashaft rotating at 2,500 rpm is transmitting a power of 15 hp. (a) if the diameter of the shaft is 1...
Questions
English, 25.06.2019 20:40
Mathematics, 25.06.2019 20:40
History, 25.06.2019 20:40
Mathematics, 25.06.2019 20:40
History, 25.06.2019 20:40
Biology, 25.06.2019 20:40
