Engineering, 13.09.2019 23:30 gianni0

Abatch dryer removes water from a solid at a rate of 30 kg/hr during the constant rate period. critical moisture content is 0.25 kg h2o dry solid. the equilibrium moisture content of the material is 0.035 kg h2o dry solid. the drier is initially charged with 750 kg of total material, which contains 2 00 000 g of moisture. the final product should contain 0.08 kg h2o dry solid. the falling rate period can be represented by a straight line. the total drying area is 5 m^2 . 1. draw a schematic diagram that depicts the process. 2. determine the total drying time to produce the product.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

You know the right answer?

Abatch dryer removes water from a solid at a rate of 30 kg/hr during the constant rate period. criti...

Questions