Engineering, 13.09.2019 23:30 Gogontle8347
An otto cycle has a volumetric compression ratio of 10 with a highest temperature (t3) of 2000 k. determine the exhaust temperature (t1) in k.
Answers: 1
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
Engineering, 06.07.2019 03:20
Write a technical essay (maximum two pages) about stress concentration. and paste from the textbook. instead, read updated material about this phenomenon and provide a technical evaluation of the different techniques to avoid/reduce such phenomenon. consider in your analysis cutting-edge computational techniques such as fea to study and analyze stress concentrations.
Answers: 2
Engineering, 06.07.2019 03:20
Major ingredients of traditional ceramics (a) silica (b) clay (c) feldspar (d) all
Answers: 1
Engineering, 06.07.2019 03:30
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.
Answers: 2
An otto cycle has a volumetric compression ratio of 10 with a highest temperature (t3) of 2000 k. de...
History, 06.04.2020 18:28
Mathematics, 06.04.2020 18:28
Mathematics, 06.04.2020 18:29
Mathematics, 06.04.2020 18:29