Determine the magnitude of the vertical force f acting on
thehandle of the wrench so that this...
Engineering, 13.09.2019 23:30 Idkdumb
Determine the magnitude of the vertical force f acting on
thehandle of the wrench so that this force produces a component
ofmoment along the ab axis (x axis) of the pipe assembly
of(ma)x={-5i} n. m. both the pipe assembly abc and the wrenchlie in
the x-y plane. suggestion: use a scalar analysis.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Mathematics, 19.04.2020 06:36
Physics, 19.04.2020 06:36
Mathematics, 19.04.2020 06:36
Mathematics, 19.04.2020 06:37
Mathematics, 19.04.2020 06:37
Mathematics, 19.04.2020 06:37
Mathematics, 19.04.2020 06:37
Chemistry, 19.04.2020 06:38
Biology, 19.04.2020 06:39