subject
Engineering, 13.09.2019 23:30 ladybugys

51/8 in thick laminated timber 24ft long column to support a roof
16 kips and floor load 38kips will be applied at 13' 4" from
base.
ke =1.0
f*c=2100 lb/in sq
c' = .9
e = 2
fv = 165
fb = 2000
kce = .418
a = bd
b = 5 1/8in
what is fc and d?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
You know the right answer?
51/8 in thick laminated timber 24ft long column to support a roof
16 kips and floor load 38kip...
Questions
question
Physics, 09.12.2019 01:31
question
Mathematics, 09.12.2019 01:31
Questions on the website: 13722361