Four signs are mounted on a frame spanning a highway, and the
magnitudes of the horizontal wind forces acting on the signs are as
shown. determine the magnitude and the point of application the
resultant of the four wind forces (distance right of ab, and
distance below bc) when a=1.5ft and b=13ft.

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.