subject
Engineering, 14.09.2019 00:10 kaitlyn4576

Asimple vapor compression refrigeration system uses r-22 as the working fluid. the evaporator pressure is 3 bar and the condenser pressure is 20 bar. the cooling load is 225 tons, the refrigerant exits the evaporator at 0 c and it exits the compressor at 160°c. (1 ton 3.517 kw). 2. a. plot and label all 5 points on the provided p-h diagram. b. determine the power input to the compressor, in kw. c. determine the rate of heat rejection from the condenser, in kw. d. determine the cop of the system. e. determine the compressor efficiency

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Asimple vapor compression refrigeration system uses r-22 as the working fluid. the evaporator pressu...
Questions
question
Social Studies, 20.01.2021 21:50
question
Mathematics, 20.01.2021 21:50
question
Mathematics, 20.01.2021 21:50
question
Mathematics, 20.01.2021 21:50
question
Mathematics, 20.01.2021 21:50
Questions on the website: 13722367