Engineering, 14.09.2019 00:30 milkshakegrande101
An airfoil is flying at 300 m/s at sea level. at a point on the airfoil surface, the pressure is 0.87 atm. assuming isentropic flow, calculate the velocity at that point.
Answers: 2
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
An airfoil is flying at 300 m/s at sea level. at a point on the airfoil surface, the pressure is 0.8...
Mathematics, 18.10.2020 06:01
History, 18.10.2020 06:01
Chemistry, 18.10.2020 06:01
Mathematics, 18.10.2020 06:01
Biology, 18.10.2020 06:01
Mathematics, 18.10.2020 06:01
Biology, 18.10.2020 06:01
Arts, 18.10.2020 06:01
Mathematics, 18.10.2020 06:01
Mathematics, 18.10.2020 06:01