Engineering, 14.09.2019 01:20 only1123
The 120 - n load can be moved along the line of action shown and applied at a, d, or e. determine the components of the reactions at f when the 120 - n load is applied (a) at a, (b) at d, (c) at e.
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
The 120 - n load can be moved along the line of action shown and applied at a, d, or e. determine th...
Chemistry, 24.07.2019 13:50
Mathematics, 24.07.2019 13:50
Biology, 24.07.2019 13:50
Mathematics, 24.07.2019 13:50
Mathematics, 24.07.2019 13:50
Social Studies, 24.07.2019 13:50
Business, 24.07.2019 13:50
Biology, 24.07.2019 13:50
Biology, 24.07.2019 13:50
Mathematics, 24.07.2019 13:50
Biology, 24.07.2019 13:50
Biology, 24.07.2019 13:50
Business, 24.07.2019 13:50