Engineering, 14.09.2019 01:30 Calliedevore

Avertical piston-cylinder device initially contains 0.1 m3 of air at 400 k and 100 kpa. at this initial condition, the piston is resting on a stop. the piston-cylinder device is connected to a supply line with air at 400 k and a pressure of 500 kpa. the valve between the supply line and the piston-cylinder device is opened and is left open until the pressure in the piston-cylinder device reaches 500 kpa. the piston is observed to start moving when the pressure in the cylinder is 200 kpa and the piston continues to rise until it reaches a second stop. at the second stop, the piston-cylinder volume is 0.2 m3 . the final temperature and pressure in the piston-cylinder device are 440 k and 500 kpa, respectively. molecular weight of air = 28.97 kg/kmol. determine heat transfer (kj) during the entire process. indicate whether it is into the system or out of the system.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 05.07.2019 19:10

Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?

Answers: 1

Answer

Engineering, 06.07.2019 02:30

In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?

Answers: 2

Answer

You know the right answer?

Avertical piston-cylinder device initially contains 0.1 m3 of air at 400 k and 100 kpa. at this init...

Questions