Engineering, 14.09.2019 02:30 robertss403
Explain what happens chemically to positive and negative photoresist when exposed to uv radiation.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
Explain what happens chemically to positive and negative photoresist when exposed to uv radiation....
Questions
Mathematics, 21.09.2019 07:50
Biology, 21.09.2019 08:00
Chemistry, 21.09.2019 08:00
Mathematics, 21.09.2019 08:00
Chemistry, 21.09.2019 08:00
History, 21.09.2019 08:00
Mathematics, 21.09.2019 08:00
Social Studies, 21.09.2019 08:00
Mathematics, 21.09.2019 08:00
Health, 21.09.2019 08:00
