Engineering, 14.09.2019 02:30 sadsociety41
For the stress obtained in the previous question, what exactly is this value referring to?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
For the stress obtained in the previous question, what exactly is this value referring to?...
Questions
Mathematics, 10.03.2021 17:00
Mathematics, 10.03.2021 17:00
English, 10.03.2021 17:00
Mathematics, 10.03.2021 17:00
Mathematics, 10.03.2021 17:00
Chemistry, 10.03.2021 17:00
Mathematics, 10.03.2021 17:00
Physics, 10.03.2021 17:00
Social Studies, 10.03.2021 17:00
Mathematics, 10.03.2021 17:00
