Engineering, 14.09.2019 02:30 grace7484

Water enters a counter flow, double-pipe heat exchanger at 45 c, flowing at the rate of 0.5 kg/s. it is heated by oil (cp = 1.884 kj/kg. k) flowing at the rate of 1 kg/s from an inlet temperature of 105 c. for an area of 18.0 m2 and an overall heat transfer coefficient of 340w/m^2.k, determine the total heat transfer rate.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

You know the right answer?

Water enters a counter flow, double-pipe heat exchanger at 45 c, flowing at the rate of 0.5 kg/s. it...

Questions