Engineering, 14.09.2019 04:10 rrojassaucedo
What are two advantages of forging when compared to machining a part from a billet?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
What are two advantages of forging when compared to machining a part from a billet?...
Questions
Mathematics, 10.12.2020 18:40
Physics, 10.12.2020 18:40
Business, 10.12.2020 18:40
Mathematics, 10.12.2020 18:40
Chemistry, 10.12.2020 18:40
Mathematics, 10.12.2020 18:40
History, 10.12.2020 18:40
Mathematics, 10.12.2020 18:40
Chemistry, 10.12.2020 18:40
History, 10.12.2020 18:40
