Engineering, 14.09.2019 05:10 clevelandjaniya1
Ablock of 250-mm length and 50 × 40-mm cross section is to support a centric compressive load p. the material to be used is a bronze for which e = 95 gpa. determine the largest load that can be applied, knowing that the normal stress must not exceed 80 mpa and that the decrease in length of the block should be at most 0.12% of its original length. the largest load that can be applied is x kn. find x
Answers: 1
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 19:20
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
Ablock of 250-mm length and 50 × 40-mm cross section is to support a centric compressive load p. the...
Chemistry, 01.06.2020 22:57
Social Studies, 01.06.2020 22:57
Computers and Technology, 01.06.2020 22:57
Mathematics, 01.06.2020 22:57
History, 01.06.2020 22:57
Computers and Technology, 01.06.2020 22:57
Mathematics, 01.06.2020 22:57
Chemistry, 01.06.2020 22:57
Mathematics, 01.06.2020 22:57
English, 01.06.2020 22:57