subject
Engineering, 14.09.2019 05:30 crosales102

Rigid tank of the volume v= 0.3 0 is filled with saturated water vapour at t. 200°c. a valve at the bottom of the tank is opened, and ri, lcin 3 sat, lined liquid water at t= 200°c is slowly injected. heat is exchanged between tank and surroundings at such a rate that temperature of the process remains constant. determine the amount of heat that must be exchanged by the time the total mass of the medium in the tank

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Rigid tank of the volume v= 0.3 0 is filled with saturated water vapour at t. 200°c. a valve at the...
Questions
question
Mathematics, 26.06.2019 09:50
Questions on the website: 13722361