Engineering, 14.09.2019 05:30 daniel195
At the instant shown, the truck is traveling to the right at 8 m/s. if the spool does not slip at b, determine its angular velocity so that its mass center g appears to an observer on the ground to remain stationary.
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
At the instant shown, the truck is traveling to the right at 8 m/s. if the spool does not slip at b,...
Mathematics, 25.08.2021 03:30
Mathematics, 25.08.2021 03:30
Mathematics, 25.08.2021 03:30
Mathematics, 25.08.2021 03:30
Mathematics, 25.08.2021 03:30
Social Studies, 25.08.2021 03:30
Mathematics, 25.08.2021 03:30
Mathematics, 25.08.2021 03:30
Chemistry, 25.08.2021 03:30